HomeStore

GM Big Block Compatible 502 c.i. Pro Series Engine - 627 Horsepower - Deluxe Dressed -Polished Pulley Kit - Carbureted

Product image 1
1 / 9
+4

GM Big Block Compatible 502 c.i. Pro Series Engine - 627 Horsepower - Deluxe Dressed -Polished Pulley Kit - Carbureted

Description:

  • Horsepower & Torque: 627 Horsepower / 569 ft. lbs. Torque
  • Compression Ratio: 10.1:1
  • BluePrint Engines Aluminum Heads
  • BluePrint Engines Hydraulic Roller Cam
  • BluePrint Engines Forged Crank
  • BluePrint Engines Forged Pistons

Block:

  • BluePrint High Strength Cast Iron Block
  • Manufactured and Machined in the USA!
  • Mech Fuel Pump Provision: Yes
  • 1-Piece Rear Main Seal
  • Standard Deck
  • 4-Bolt Main
  • 4.466" Bore

Rotating Assembly:

  • BluePrint Forged Crankshaft
  • 4.000" Stroke
  • Forged H-beam 6.385" Connecting Rods
  • Forged Pistons
  • Internally Balanced Front and Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads -PS8013
  • 119cc Chamber
  • 2.30" Intake / 1.88" Exhaust Valves
  • 316cc Intake / 124cc Exhaust Runners
  • Cylinder Heads Feature a .300 in. Raised Exhaust Port vs an OEM Casting
  • Must Verify Header / Exhaust Clearance

Cam Specs:

  • Hydraulic Roller
  • .647 Intake / .647 Exhaust Lift
  • 248 Intake / 254 Exhaust Duration
  • @ .050-112 Degree Lobe Separation

Also Includes:

  • Holley 850cfm Double Pumper Carburetor w/ Manual Choke - BPP04781S
  • Pro Series Ready Run Distributor - BPP3503BK
  • Harmonic Balancer - BPP454I
  • Spark Plugs and Wires
  • Timing Cover
  • Valve Covers
  • Oil Pan 
  • Polished Pulley Kit - BPP454FDPSAC4
    • Reverse Rotation Short Water Pump
    • 1- Wire 140amp Alternator
    • Peanut Style Air Conditioning Compressor
    • Type II Power Steering Pump with Remote Reservoir

Notes:

  • Not for use in pollution-controlled vehicles
  • Initial advance should be set at 13-16 Degree BTDC. The total advance should be NO MORE than 34 Degree BTDC and Should be reached by about 4000 RM.
  • BluePrint Engines recommends using a distributor with melonized iron or steel gear ONLY on this engine.
  • The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
 

    Description:

    • Horsepower & Torque: 627 Horsepower / 569 ft. lbs. Torque
    • Compression Ratio: 10.1:1
    • BluePrint Engines Aluminum Heads
    • BluePrint Engines Hydraulic Roller Cam
    • BluePrint Engines Forged Crank
    • BluePrint Engines Forged Pistons

    Block:

    • BluePrint High Strength Cast Iron Block
    • Manufactured and Machined in the USA!
    • Mech Fuel Pump Provision: Yes
    • 1-Piece Rear Main Seal
    • Standard Deck
    • 4-Bolt Main
    • 4.466" Bore

    Rotating Assembly:

    • BluePrint Forged Crankshaft
    • 4.000" Stroke
    • Forged H-beam 6.385" Connecting Rods
    • Forged Pistons
    • Internally Balanced Front and Rear

    Cylinder Heads:

    • BluePrint Aluminum Cylinder Heads -PS8013
    • 119cc Chamber
    • 2.30" Intake / 1.88" Exhaust Valves
    • 316cc Intake / 124cc Exhaust Runners
    • Cylinder Heads Feature a .300 in. Raised Exhaust Port vs an OEM Casting
    • Must Verify Header / Exhaust Clearance

    Cam Specs:

    • Hydraulic Roller
    • .647 Intake / .647 Exhaust Lift
    • 248 Intake / 254 Exhaust Duration
    • @ .050-112 Degree Lobe Separation

    Also Includes:

    • Holley 850cfm Double Pumper Carburetor w/ Manual Choke - BPP04781S
    • Pro Series Ready Run Distributor - BPP3503BK
    • Harmonic Balancer - BPP454I
    • Spark Plugs and Wires
    • Timing Cover
    • Valve Covers
    • Oil Pan 
    • Polished Pulley Kit - BPP454FDPSAC4
      • Reverse Rotation Short Water Pump
      • 1- Wire 140amp Alternator
      • Peanut Style Air Conditioning Compressor
      • Type II Power Steering Pump with Remote Reservoir

    Notes:

    • Not for use in pollution-controlled vehicles
    • Initial advance should be set at 13-16 Degree BTDC. The total advance should be NO MORE than 34 Degree BTDC and Should be reached by about 4000 RM.
    • BluePrint Engines recommends using a distributor with melonized iron or steel gear ONLY on this engine.
    • The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.
     
      $14,399.00
      GM Big Block Compatible 502 c.i. Pro Series Engine - 627 Horsepower - Deluxe Dressed -Polished Pulley Kit - Carbureted
      $14,399.00

      Description

      Description:

      • Horsepower & Torque: 627 Horsepower / 569 ft. lbs. Torque
      • Compression Ratio: 10.1:1
      • BluePrint Engines Aluminum Heads
      • BluePrint Engines Hydraulic Roller Cam
      • BluePrint Engines Forged Crank
      • BluePrint Engines Forged Pistons

      Block:

      • BluePrint High Strength Cast Iron Block
      • Manufactured and Machined in the USA!
      • Mech Fuel Pump Provision: Yes
      • 1-Piece Rear Main Seal
      • Standard Deck
      • 4-Bolt Main
      • 4.466" Bore

      Rotating Assembly:

      • BluePrint Forged Crankshaft
      • 4.000" Stroke
      • Forged H-beam 6.385" Connecting Rods
      • Forged Pistons
      • Internally Balanced Front and Rear

      Cylinder Heads:

      • BluePrint Aluminum Cylinder Heads -PS8013
      • 119cc Chamber
      • 2.30" Intake / 1.88" Exhaust Valves
      • 316cc Intake / 124cc Exhaust Runners
      • Cylinder Heads Feature a .300 in. Raised Exhaust Port vs an OEM Casting
      • Must Verify Header / Exhaust Clearance

      Cam Specs:

      • Hydraulic Roller
      • .647 Intake / .647 Exhaust Lift
      • 248 Intake / 254 Exhaust Duration
      • @ .050-112 Degree Lobe Separation

      Also Includes:

      • Holley 850cfm Double Pumper Carburetor w/ Manual Choke - BPP04781S
      • Pro Series Ready Run Distributor - BPP3503BK
      • Harmonic Balancer - BPP454I
      • Spark Plugs and Wires
      • Timing Cover
      • Valve Covers
      • Oil Pan 
      • Polished Pulley Kit - BPP454FDPSAC4
        • Reverse Rotation Short Water Pump
        • 1- Wire 140amp Alternator
        • Peanut Style Air Conditioning Compressor
        • Type II Power Steering Pump with Remote Reservoir

      Notes:

      • Not for use in pollution-controlled vehicles
      • Initial advance should be set at 13-16 Degree BTDC. The total advance should be NO MORE than 34 Degree BTDC and Should be reached by about 4000 RM.
      • BluePrint Engines recommends using a distributor with melonized iron or steel gear ONLY on this engine.
      • The front accessory drive on this engine fits many vehicles, however it is the customer responsibility to accurately measure and confirm fitment.  Note this is a low-profile design, but things such as power steering hoses, alternator wiring, and additional fittings/fabrication may be required on some vehicles.