HomeStore

Vortec Truck & SUV 1996-2000 - GM Small Block Compatible 383 c.i. Engine - Long Block

Product image 1
1 / 7
+2

Vortec Truck & SUV 1996-2000 - GM Small Block Compatible 383 c.i. Engine - Long Block

Description:

  • 49 State Legal
  • Built with Small Block Chevy Engine Kit Part number BPP38350RA, California Executive Order# D-824-1
  • +47 Rear Wheel Horsepower Increase over Factory
  • + 55 Rear Wheel ft/lbs Torque Increase over Factory
  • Compression Ratio: 10:1
  • BluePrint Engines Aluminum Heads
  • BluePrint Engines Hydraulic Roller Cam
  • BluePrint Engines Cast Crankshaft
  • BluePrint Engines Hypereutectic Pistons

Block:

  • BluePrint Engines High Strength Cast Iron Block
  • Manufactured and Machined in the USA!
  • Drilled and Tapped for Clutch Linkage
  • Mech Fuel Pump Provision: Yes
  • Passenger Side Dipstick
  • 1-Piece Rear Main Seal
  • 4-Bolt Main
  • 4.000" Bore

Rotating Assembly:

  • Cast Crankshaft
  • 3.750" Stroke
  • OEM Type 5.700" Connecting Rods w/ 150,000 PSI Bolts
  • Hypereutectic Pistons
  • Externally Balanced Front and Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - H8002K
  • 64cc Chamber
  • 2.02" Intake / 1.60" Exhaust Valves
  • 195cc Intake / 75cc Exhaust Runners

Cam Specs:

  • Hydraulic Roller Cam
  • .477 Intake / .471 Exhaust Lift
  • 202 Intake / 212 Exhaust Duration
  • @ .050-115 Degree Lobe Separation

Ignition Timing:

  • Computer-Controlled

Also Includes:

  • Harmonic Balancer
  • Timing Cover
  • Valve Covers
  • Dipstick
  • Oil Pan

Notes:

  • This engine features a true 4-inch bore, which mathematically yields 377 CID with a 3.75-inch stroke.
  • This 383 stroker is designed for use in 1996 - 2000 Chevrolet Pickup or SUV that was originally equipped with a 350ci (5.7L) engine. 
  • No ECU tuning or recalibration is required.
  • Advertised horsepower gains were achieved on chassis dyno, w/ factory EFI and ECU, in a Vortec equipped, otherwise factory, GM truck. 
  • We have taken our BluePrint OEM style Block and assembled the Small Block Chevy Kit to give you a 24% increase of 49 state legal horsepower, when installed in a GM pickup or SUV year 2000 or older model year that came with a California certified Gen 1 naturally aspirated 5.7 gasoline engine block.
  • This engine may require modification to existing front accessory drive mounting brackets if retaining OEM front accessory drive. 
  • Note: This engine kit has a California Air Resources Board (C.A.R.B.) Executive Order (E.O.) number: D-824-1. 

    Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
    www.P65Warnings.ca.gov

    Description:

    • 49 State Legal
    • Built with Small Block Chevy Engine Kit Part number BPP38350RA, California Executive Order# D-824-1
    • +47 Rear Wheel Horsepower Increase over Factory
    • + 55 Rear Wheel ft/lbs Torque Increase over Factory
    • Compression Ratio: 10:1
    • BluePrint Engines Aluminum Heads
    • BluePrint Engines Hydraulic Roller Cam
    • BluePrint Engines Cast Crankshaft
    • BluePrint Engines Hypereutectic Pistons

    Block:

    • BluePrint Engines High Strength Cast Iron Block
    • Manufactured and Machined in the USA!
    • Drilled and Tapped for Clutch Linkage
    • Mech Fuel Pump Provision: Yes
    • Passenger Side Dipstick
    • 1-Piece Rear Main Seal
    • 4-Bolt Main
    • 4.000" Bore

    Rotating Assembly:

    • Cast Crankshaft
    • 3.750" Stroke
    • OEM Type 5.700" Connecting Rods w/ 150,000 PSI Bolts
    • Hypereutectic Pistons
    • Externally Balanced Front and Rear

    Cylinder Heads:

    • BluePrint Aluminum Cylinder Heads - H8002K
    • 64cc Chamber
    • 2.02" Intake / 1.60" Exhaust Valves
    • 195cc Intake / 75cc Exhaust Runners

    Cam Specs:

    • Hydraulic Roller Cam
    • .477 Intake / .471 Exhaust Lift
    • 202 Intake / 212 Exhaust Duration
    • @ .050-115 Degree Lobe Separation

    Ignition Timing:

    • Computer-Controlled

    Also Includes:

    • Harmonic Balancer
    • Timing Cover
    • Valve Covers
    • Dipstick
    • Oil Pan

    Notes:

    • This engine features a true 4-inch bore, which mathematically yields 377 CID with a 3.75-inch stroke.
    • This 383 stroker is designed for use in 1996 - 2000 Chevrolet Pickup or SUV that was originally equipped with a 350ci (5.7L) engine. 
    • No ECU tuning or recalibration is required.
    • Advertised horsepower gains were achieved on chassis dyno, w/ factory EFI and ECU, in a Vortec equipped, otherwise factory, GM truck. 
    • We have taken our BluePrint OEM style Block and assembled the Small Block Chevy Kit to give you a 24% increase of 49 state legal horsepower, when installed in a GM pickup or SUV year 2000 or older model year that came with a California certified Gen 1 naturally aspirated 5.7 gasoline engine block.
    • This engine may require modification to existing front accessory drive mounting brackets if retaining OEM front accessory drive. 
    • Note: This engine kit has a California Air Resources Board (C.A.R.B.) Executive Order (E.O.) number: D-824-1. 

      Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
      www.P65Warnings.ca.gov

      $6,999.00
      Vortec Truck & SUV 1996-2000 - GM Small Block Compatible 383 c.i. Engine - Long Block
      $6,999.00

      Description

      Description:

      • 49 State Legal
      • Built with Small Block Chevy Engine Kit Part number BPP38350RA, California Executive Order# D-824-1
      • +47 Rear Wheel Horsepower Increase over Factory
      • + 55 Rear Wheel ft/lbs Torque Increase over Factory
      • Compression Ratio: 10:1
      • BluePrint Engines Aluminum Heads
      • BluePrint Engines Hydraulic Roller Cam
      • BluePrint Engines Cast Crankshaft
      • BluePrint Engines Hypereutectic Pistons

      Block:

      • BluePrint Engines High Strength Cast Iron Block
      • Manufactured and Machined in the USA!
      • Drilled and Tapped for Clutch Linkage
      • Mech Fuel Pump Provision: Yes
      • Passenger Side Dipstick
      • 1-Piece Rear Main Seal
      • 4-Bolt Main
      • 4.000" Bore

      Rotating Assembly:

      • Cast Crankshaft
      • 3.750" Stroke
      • OEM Type 5.700" Connecting Rods w/ 150,000 PSI Bolts
      • Hypereutectic Pistons
      • Externally Balanced Front and Rear

      Cylinder Heads:

      • BluePrint Aluminum Cylinder Heads - H8002K
      • 64cc Chamber
      • 2.02" Intake / 1.60" Exhaust Valves
      • 195cc Intake / 75cc Exhaust Runners

      Cam Specs:

      • Hydraulic Roller Cam
      • .477 Intake / .471 Exhaust Lift
      • 202 Intake / 212 Exhaust Duration
      • @ .050-115 Degree Lobe Separation

      Ignition Timing:

      • Computer-Controlled

      Also Includes:

      • Harmonic Balancer
      • Timing Cover
      • Valve Covers
      • Dipstick
      • Oil Pan

      Notes:

      • This engine features a true 4-inch bore, which mathematically yields 377 CID with a 3.75-inch stroke.
      • This 383 stroker is designed for use in 1996 - 2000 Chevrolet Pickup or SUV that was originally equipped with a 350ci (5.7L) engine. 
      • No ECU tuning or recalibration is required.
      • Advertised horsepower gains were achieved on chassis dyno, w/ factory EFI and ECU, in a Vortec equipped, otherwise factory, GM truck. 
      • We have taken our BluePrint OEM style Block and assembled the Small Block Chevy Kit to give you a 24% increase of 49 state legal horsepower, when installed in a GM pickup or SUV year 2000 or older model year that came with a California certified Gen 1 naturally aspirated 5.7 gasoline engine block.
      • This engine may require modification to existing front accessory drive mounting brackets if retaining OEM front accessory drive. 
      • Note: This engine kit has a California Air Resources Board (C.A.R.B.) Executive Order (E.O.) number: D-824-1. 

        Yellow Exclamation Triangle WARNING: Cancer and Reproductive Harm-
        www.P65Warnings.ca.gov